Manufacture of YSZ-LSM Semi-Cell by Colloidal Processing

Abstract

Yttria stabilized zirconia (YSZ) is the most common electrolyte in solid oxide fuel cells (SOFC). The planar configuration is widely used for designing single cells, in which a thick cathode layer can be used as the supporting electrolyte film. The manufacture of the semi-cell formed by anode and electrolyte has been widely studied and there are many works dealing with its colloidal processing. However, the semi-cell formed by cathode and electrolyte has received much lower attention. This work deals with the manufacture of a semi-cell consisting of YSZ as electrolyte and strontium-doped lanthanum manganite (LSM) as a cathode through a colloidal processing route. The colloidal behavior of diluted suspensions of YSZ and the rheology of their concentrated suspensions were studied as a function of deflocculant content, mixing time by using ultrasounds probe and ageing time. The colloidal stability of aqueous suspensions of LSM was studied by measuring the zeta potential as a function of pH and deflocculant content. These concentrated suspensions were used to obtain thick self-sustained substrates by casting methods. The YSZ electrolyte and LSM cathode were prepared by tape casting in water medium.